Y60BF Stainless steel pressure···

　　Regarding the Y60BF stainless steel pressure gauge of Shangyi, the following is a detailed introduction:

　　1、 Basic Overview

　　The Y60BF stainless steel pressure gauge is a pressure measuring instrument made of stainless steel material, which has characteristics such as shock resistance and corrosion resistance. The "Y60BF" in its model indicates that the diameter of the instrument is 60mm, suitable for various situations that require precise pressure measurement.

　　2、 Main features

　　High precision: The Y60BF stainless steel pressure gauge on the instrument has a high precision level, such as 1.6 or 2.5, which can meet the needs of different measurement accuracies.

　　Seismic performance: Adopting damping and shock resistant design, the instrument can maintain stable readings even in vibration or impact environments.

　　Corrosion resistance: Due to the use of stainless steel material, the instrument has good corrosion resistance and is suitable for measuring corrosive media.

　　Stable reading: The pointer and dial of the instrument are designed reasonably, making the reading stable and easy to observe.

　　3、 Technical parameters

　　Surface diameter: usually 60mm, there are also other specifications available such as 100mm, 150mm, 200mm, etc.

　　Accuracy level: 1.6 or 2.5, meeting the requirements of different measurement accuracies.

　　Measurement range: The measurement range varies depending on the specific model and application scenario, such as 00.06MPa to 060MPa.

　　Environmental conditions for use: usually suitable for environments with temperatures ranging from -40 to+70 ℃ and relative humidity not exceeding 85%.

　　Installation method: Axial installation or radial installation can be used, depending on the specific usage requirements.

　　4、 Scope of application

　　The Y60BF stainless steel pressure gauge is suitable for measuring the pressure of liquids, gases, and other media that are non explosive, non crystalline, non solidifying, and do not corrode copper and copper alloys. Widely used in ship repair shops, diesel engine manufacturing plants, and other industrial applications that require precise pressure measurement.

　　5、 Usage and precautions

　　Usage:

　　Before use, the type, specifications, and measurement range of the instrument should be carefully checked to ensure compliance with usage requirements.

　　Install the instrument in a suitable position, ensuring that it is at the same level as the pressure point to reduce additional errors.

　　Open the plug of the instrument to allow the measured medium to enter the instrument for measurement.

　　Read the pressure value indicated by the pointer, and pay attention to keeping the instrument dry and clean.

　　Attention:

　　Avoid excessive impact or vibration on the instrument to avoid affecting measurement accuracy.

　　Regularly check the pointers, dials, and connecting pipes of the instrument to ensure that they are intact and undamaged.

　　If abnormal instrument readings or other suspicious traces are found, they should be immediately calibrated or replaced.

　　In summary, the Y60BF stainless steel pressure gauge from Shangyi is a high-precision, shock resistant, and corrosion-resistant pressure measuring instrument, suitable for various occasions that require precise pressure measurement. When using, attention should be paid to following the usage methods and precautions to ensure the normal operation and measurement accuracy of the instrument.