Y-63BF-MC Axial Hygienic Diaph···

　　The Y-60BF-MC Axial sanitary diaphragm pressure gauge is a widely used equipment in the pharmaceutical, food, drinking water, water treatment and other industries with hygiene requirements for instruments. The following is a detailed introduction to the device:

　　1、 Product Overview

　　The Y-60BF-MC Axial sanitary diaphragm pressure gauge has the advantages of quick and convenient assembly and disassembly on the process site, low pollution, easy cleaning, safety and reliability, and can meet the requirements of Good Manufacturing Practice (GMP) for drug production.

　　2、 Main parameters and characteristics

　　Dial diameter: generally 60mm (there may be other specifications such as 100mm, 150mm, etc., depending on actual needs).

　　Measurement range: usually within the range of 0-2.5MPa, the specific range can be customized according to actual process requirements.

　　Accuracy level: For dials with a diameter of 60mm, it is generally level 2.5; For larger dials, such as those with a diameter of 100mm Ф150mm， The accuracy level may be higher, reaching level 1.6.

　　Diaphragm and flange material: The diaphragm material is usually 316 or 316L stainless steel, which has good corrosion resistance; The flange material is also 316 or 316L stainless steel to ensure compatibility with the process medium.

　　Seal material: Seals are generally made of materials such as silicone rubber or polytetrafluoroethylene, which have good sealing performance and corrosion resistance.

　　Stability and reliability: This pressure gauge has good stability and can maintain accurate measurements for a long time; Meanwhile, its structural design is reasonable, with a long service life and high reliability.

　　3、 Application scenarios

　　The Y-60BF-MC Axial sanitary diaphragm pressure gauge is widely used in industries such as pharmaceuticals, food, drinking water, and water treatment, and is particularly suitable for process flows that require instrument hygiene. In these industries, this pressure gauge can ensure the accuracy and reliability of measurement results while meeting the requirements of hygiene standards.

　　4、 Selection and installation suggestions

　　Selection suggestion: When choosing the Y-60BF-MC Axial sanitary diaphragm pressure gauge, the appropriate range, accuracy level, and dial diameter should be selected according to the actual process requirements. At the same time, it should be ensured that the material of the selected product is compatible with the process medium to avoid corrosion or leakage problems caused by material mismatch.

　　Installation suggestion: During the installation process, strictly follow the product manual to ensure correct and secure installation. At the same time, attention should be paid to keeping the instrument clean and dry to avoid contamination or moisture. During use, instruments should be regularly inspected and maintained to ensure their normal operation and extend their service life.

　　In summary, the Y-60BF-MC Axial sanitary diaphragm pressure gauge is a widely used instrument equipment that can meet the hygiene and measurement accuracy requirements of industries such as pharmaceuticals and food. During the selection and installation process, actual needs and process conditions should be fully considered to ensure the applicability and reliability of the selected product.